Wireline & Logging Services

    Wireline logging services are an important part of the oil and gas industry, as they provide valuable information that helps companies optimize the exploration and production of oil and gas reserves.
    This information is used to help oil and gas companies understand the potential productivity of a reservoir and to optimize the extraction process.

Solutions

  • High Shot Density (HSD) /Casing Perforations.
  • Cement Bond Logs (CBL).
  • Through Tubing Perforations.
  • Casing Perforations.
  • Tubing/Casing Punchers.
  • Through Tubing Positive Seal Plugs.
  • Cement Dump With Bailers.
  • Pipe Recovery Services: Free Point Indicator Tool.
  • Backoff, Cutters, Colliding Tools, Split Shots.
  • Pressure Control Equipment.
  • Gamma-Ray/CCL Correlation Logs.
  • Baker Setting Tool (BST) Plug Setting
  • Magnetic Orienting Perforation Application (MOT)
  • Smart Blaster Services
  • Production Logging Services (PLT)
  • Multi Finger Caliper Operations

Equipments & Resources

  • Wireline Logging Units Equipped With different sized E.Line Cables
  • Wireline Logging Trucks Equipped With different sized E.Line Cables
  • Power Generating Equipments.
  • Air Compressors.
  • Pressure Control Equipments for Cased Hole Services.

Well Testing

   Well test is the execution of a set of planned data acquisition activities. The acquired data is analyzed to broaden the knowledge and increase the understanding of the hydrocarbon properties therein and characteristics of the underground reservoir where the hydrocarbons are trapped.
   The test will also provide information about the state of the particular well used to collect data.

Solutions

  • Flow back service.
  • MRT - Multi Rate Test
  • Clean up.

Equipments & Resources

  • SSV
  • Gas Diverter
  • Oil Manifold
  • ESD Panel.
  • Sand Filter.
  • Choke manifold.
  • Steam exchanger.
  • Test Separator
  • Surge Tank
  • Steam Generator
  • Transfer pump

DST/TCP

   Tubing Conveyed Perforation (TCP) is a technique used in the oil and gas industry to create perforations in the walls of a well bore in order to allow the flow of oil or gas from the surrounding reservoir into the well.
   TCP is used when it is not possible or practical to create perforations using other methods, such as wireline or coiled tubing.

Solutions

  • Planning and preparation.
  • Running the tubing string.
  • Activating the TCP gun.
  • Removing the tubing string.
  • Completing the well.
  • Monitoring and maintenance.

Equipments & Resources

  • TCP gun.
  • Tubing string.
  • TCP cable.
  • Control panel.
  • Pump truck.
  • Blowout preventer (BOP).

Gravel Pack

   Gravel packing is a technique used in oil and gas production to stabilize and strengthen the wellbore and prevent the migration of sand and other particles into the well.
   Gravel packing is often used in conjunction with other well completion techniques, such as perforation and fracturing, to increase the productivity of the well. It can be performed either during the initial completion of the well or as part of a remediation or enhancement effort later in the life of the well.

Solutions

  • Preparation and cleaning of the wellbore
  • Placement of the gravel pack
  • Compact the gravel pack
  • Perforate the casing
  • Pressure testing
  • Completion and production

Equipments & Resources

  • Gravel pack sand
  • Gravel pack screen
  • Gravel pack fluid
  • Gravel pack head
  • Pumping equipment
  • Surface equipment
  • Downhole tools
  • Monitoring equipment

Completions

   Completions is the process of preparing a well for production after drilling is completed.
   This may involve Running casing and cementing, Perforating the casing, Installing production equipment, Testing the well etc.

Solutions

  • Running casing and cementing
  • Perforating the casing
  • Installing production equipment
  • Testing the well
  • Stimulating the well
  • Plugging and abandoning the well
  • Repairing or maintaining the well

Equipments & Resources

  • Casing and cementing equipment
  • Packer and bridge plug
  • Sand control equipment
  • Wellhead and Christmas tree equipment
  • Downhole tools
  • Stimulation equipment
  • Production and flow control equipment
  • Monitoring and measuring equipmen

WellHead Engineering

    Wellhead engineering involves the design, selection, and installation of the wellhead and related equipment at the surface of an oil or gas well..
   The wellhead is a critical component of an oil or gas well, as it must be able to withstand the forces and pressures that are exerted on it during the drilling, production, and maintenance of the well.

Solutions

  • Designing and installion
  • Conducting well integrity assessments to ensure the well is operating safely and efficiently.
  • Performing maintenance and repairs
  • Implementing safety measures
  • Managing and coordinating the drilling
  • Ensuring compliance with regulatory requirements and industry standards.
  • Providing technical support

Equipments & Resources

  • Blowout preventers (BOPs)
  • Casing
  • Tubing
  • Christmas tree
  • Drilling rig
  • Production facilities
  • Safety equipment
  • Maintenance and repair tools

Corrossion Monitoring

   This is the process of monitoring and measuring the corrosion of metal components in a well, such as pipes, casings, and other infrastructure.
    This information can be used to determine the need for maintenance or repair, and to develop strategies for preventing or mitigating corrosion.

Solutions

  • Corrosion rate measurement
  • Corrosion potential measurement
  • Non-destructive testing:
  • Corrosion mapping
  • Corrosion monitoring equipment installation and maintenance
  • Data analysis

Equipments & Resources

  • Corrosion probes and sensors
  • Electrodes
  • Non-destructive testing equipment
  • Data loggers
  • Corrosion mapping software
  • Calibration equipment

Flosmart Energy Services Limited © . All Rights Reserved